1.Bed panel The bed surface is made of high-quality cold-rolled steel strips, with a thickness of 1.2mm and an M-shaped design, which is breathable and has anti-slip function. There are no solder joints on the surface, there are steel pipe reinforcements on the back, and it adopts a double support structure to extend the life of the hospital bed. Four: Main components of the bed: 1. The bed frame is made of 40mm×80mm×1.2mm high-quality carbon steel rectangular tube;
2. The four corners of the bed are equipped with anti-collision corners. The corners are made of one-time injection molding of ABS engineering plastic. The corners can only be disassembled with special tools, and the appearance is beautiful. There are infusion pole sockets at the four corners of the bed, so you can choose the infusion position as needed. Five: Guardrail Guardrail: Six-speed aluminum alloy folding guardrail, fully covered structure, six-speed design, the surface of the guardrail is electrophoresis hardened, anti-pinch design, and can be adjusted up and down as needed. It can be covered with a high-quality dining table board as needed to facilitate patients' daily eating and reading. When the guardrail is retracted, it is slightly lower than the mattress, which is ergonomic. D-type ABS handrails can be retracted freely; the upper and lower supports of the guardrail are made of cold steel stampings with a thickness of ≥3.0mm. Each support is covered with an ABS jacket and a high-strength glass fiber nylon quick positioning switch. It is dustproof, beautiful, durable, and can withstand 50kg tensile load, stable, not easily damaged, anti-pinch, easy to operate.
Six: Bedside and footboard 1. Made of high-strength engineering plastic injection molding, the surface is smooth and easy to clean; 2. It adopts a hanging structure, which has high strength, strong stability, and easy disassembly. The front and rear plastics are partially integrated and have high strength. Seven: casters 1. The bed foot adopts 50×50×1.2mm steel frame; 2. Four brake casters with a diameter of ≥5 inches, four corners with independent braking functions, anti-static, good silent effect, and strong braking ability. The rotation should be flexible and reliable. The casters and the bed frame are firmly assembled, and the bed will not slide relative to each other after braking. , convenient for implementation and control. The main frame and wheel core of the caster are made of PA6 material with strong load-bearing capacity, which is oil-resistant, wear-resistant, drug-resistant and chemical-resistant, ensuring the service life of the caster. The wheel surface material is made of wear-resistant TPR, which is oil-resistant. , water-resistant, drug-resistant and mold-resistant, and also has good shock absorption and noise reduction functions. The casters are equipped with precision bearings inside to reduce noise and improve the overall smoothness of the casters.
|
){kind=link}