| Customization: | Available |
|---|---|
| Material: | Metal |
| Type: | Manual Bed |
|
Still deciding? Get samples of US$ 160/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Bed panel The bed surface is made of high-quality cold-rolled steel strips, with a thickness of 1.2mm and an M-shaped design, which is breathable and has anti-slip function. There are no solder joints on the surface, there are steel pipe reinforcements on the back, and it adopts a double support structure to extend the life of the hospital bed. Four: Main components of the bed: 1. The bed frame is made of 40mm×80mm×1.2mm high-quality carbon steel rectangular tube; 2. The four corners of the bed are equipped with anti-collision corners. The corners are made of one-time injection molding of ABS engineering plastic. The corners can only be disassembled with special tools, and the appearance is beautiful. There are infusion pole sockets at the four corners of the bed, so you can choose the infusion position as needed. Five: Guardrail Guardrail: Six-speed aluminum alloy folding guardrail, fully covered structure, six-speed design, the surface of the guardrail is electrophoresis hardened, anti-pinch design, and can be adjusted up and down as needed. It can be covered with a high-quality dining table board as needed to facilitate patients' daily eating and reading. When the guardrail is retracted, it is slightly lower than the mattress, which is ergonomic. D-type ABS handrails can be retracted freely; the upper and lower supports of the guardrail are made of cold steel stampings with a thickness of ≥3.0mm. Each support is covered with an ABS jacket and a high-strength glass fiber nylon quick positioning switch. It is dustproof, beautiful, durable, and can withstand 50kg tensile load, stable, not easily damaged, anti-pinch, easy to operate.
Six: Bedside and footboard 1. Made of high-strength engineering plastic injection molding, the surface is smooth and easy to clean; 2. It adopts a hanging structure, which has high strength, strong stability, and easy disassembly. The front and rear plastics are partially integrated and have high strength. Seven: casters 1. The bed foot adopts 50×50×1.2mm steel frame; 2. Four brake casters with a diameter of ≥5 inches, four corners with independent braking functions, anti-static, good silent effect, and strong braking ability. The rotation should be flexible and reliable. The casters and the bed frame are firmly assembled, and the bed will not slide relative to each other after braking. , convenient for implementation and control. The main frame and wheel core of the caster are made of PA6 material with strong load-bearing capacity, which is oil-resistant, wear-resistant, drug-resistant and chemical-resistant, ensuring the service life of the caster. The wheel surface material is made of wear-resistant TPR, which is oil-resistant. , water-resistant, drug-resistant and mold-resistant, and also has good shock absorption and noise reduction functions. The casters are equipped with precision bearings inside to reduce noise and improve the overall smoothness of the casters.
|
| Shandong Guanghua Medical Equipment Co., Ltd is a professional manufacturer of medical device that integrates research and development, production and sales service. Our company has strong R&D capabilities, advanced automated production equipment, and complete quality testing instruments and quality management systems. Main products are medical beds, medical vehicles, medical cabinets, tables, chairs, racks and hundreds of other products for hospital and nursing home care. Excellent material selection, advanced production technology, excellent technology, and precise testing equipment provides reliable guarantee for the quality of our products. That is also why our company has become a safe and reliable manufacturer of professional ward care products in medical industry. We always adhere to the business philosophy of "technological innovation, first-class quality, and service first" to provide high-quality and reliable products and service to our domestic and foreign customers. |
2.Q: Do you provide OEM or ODM service if customers need?
A: Yes. We have experienced research & develop team as well as corresponding equipment, so we can produce as per customers' requirements, including OEM or ODM service.
3.Q: What's your MOQ? What discount we can get if we place a big order?
A: Our MOQ is one set. The unit price is different depends on order quantity. The more quantity you order, the unit price will be cheaper.
4.Q: What's your payment term? What's your accepted payment type?
A: 30% deposit before producing and the remaining 70% is paid before shipping. Accepted payment type: T/T, L/C, Credit Card, West Union etc.
5.Q: What trade terms can you do?
A: Usually FOB, CFR, CIF, EXW, DDU, other terms can be negotiated.Sending by sea, air or Express are available. |
){kind=link}